Landcover-Dependent Assessment of the Relative Height Accuracy in TanDEM-X DEM Products

Digital elevation models (DEMs) are extensively used for a variety of scientific and commercial applications. For the global TanDEM-X DEM, one of the main performance parameters is the relative height accuracy, which is specified to be under 2 m for flat terrain. Land cover types where the radar signal penetrates into a volume, as forest and ice, are excluded from this specification. Knowing the accuracy of the DEM for a specific land cover type is essential for applications relying on it, such as navigation applications, gradient and aspect estimations, and others. This letter is meant to be as add-on the global relative analysis presented in [1]. Here, we present a characterization of the relative height accuracy based on the interferometric coherence assessing the performance for every class defined by the CCI Land Cover Maps at a continental and global basis. This characterization raises the awareness of the advantages and limitations of the DEM for each specific application and helps scientists using the TanDEM-X DEM to interpret their results. In addition, an estimation of the relative height accuracy for acquisitions where volume decorrelation is present is locally performed using the high-frequency component of repeat-pass DEMs differences. For two particular land cover types, both methods are compared. The main source of errors in the DEM generation is clearly associated with strong inhomogeneous signal returns, becoming a driving factor on the actual accuracy of the estimated mean phase center height.