Analysis and Design of N-Path RF Bandstop Filters Using Walsh-Function-Based Sequence Mixing

Impedance translation using passive N-path mixers has been used to achieve local oscillator (LO)-defined series bandstop and shunt bandpass filtering. In this paper, we generalize N-path filtering using a correlator-based approach and propose N-path passive mixers driven by orthogonal sequences. Such sequence-driven N-path filters can potentially reject or select signals based on their properties in the spectral, spatial, and code domains. Specifically, a Walsh-function (WF) sequence (WF-seq)-based N-path shunt filter is implemented, demonstrating the feasibility of shunt bandstop filtering using LO sequences other than nonoverlapping pulses. The WF-seq approach enables reconfigurable concurrent filtering at two different frequencies with shunt operation avoiding penalties due to the switch drive overlap. A 65-nm CMOS implementation achieves 20-dB rejection at one frequency and 14-dB rejection concurrently at two frequencies between 0.3 and 1.4 GHz. The reconfigurable bandstop filter is implemented using analog gyrators and consumes 35-62.5 mW and achieves 2.9-dB noise figure and -2.5-5-dBm IIP3.