Stepwise Magnetization Control Strategy for DC-Magnetized Memory Machine

A memory machine (MM) equipped with hybrid permanent magnets (PMs), i.e., NdFeB and low coercive force PMs, exhibits acceptable torque capability at low speeds and high efficiency at high speeds. Previous literatures have addressed that the constant power speed range (CPSR) of MMs can be further extended by online PM flux control and the requirement of the flux-weakening (FW) inverter current can be reduced as well. Nevertheless, how to coordinate the d-axis vector FW and PM magnetization control over a whole operating range in a reasonable manner remains unreported. Therefore, this paper proposes and implements a stepwise magnetization control strategy on a dc-magnetized MM based on the operating characteristics under various PM magnetization states and speed ranges. The configuration, principle, and mathematical model of the investigated machine are introduced first. Then, the proposed control strategy is established by dividing the operating envelop into several FW regions and an appropriate FW control scheme is utilized at each stage. It demonstrates that the CPSR can be effectively extended by simply applying the demagnetizing current pulses in several steps. This simplifies the control efforts considerably without resorting to continuous PM flux control and frequent actions of the switching devices. The effectiveness of the proposed control strategy is verified by experimental results.