Implementing Quasi-Elliptic Microstrip Filters Using Terminating Half Sections

This letter presents a technique for the introduction of transmission zeros (TZs) using half section matched terminations for implementing high selectivity filters in planar technology. The proposed technique does not require any cross coupling between nonadjacent resonators or multiple signal paths, and it can be easily incorporated on any planar filter using lumped, quasi-lumped, and/or distributed elements depending on the desired response. Two different bandpass filter topologies are employed for applying the proposed technique. Both prototypes are designed, manufactured, and measured. The measured results show that the TZs can be independently located very close to the passband edges, without degrading the original filter response.