Performance Evaluation of Magnetic Lead Screws Equipped With Skewed Arc Magnets Instead of Helical Ones

This paper investigates the performance of a magnetic lead screw (MLS) equipped with skewed arc magnets. Skewed arc magnets are adopted to approximate the helical ones, because the latter is hard to realize. Although similar method had been proposed in the previous literature, discussion about the parameters of the skewed arc magnets was insufficient and little attention was paid to the gear ratio of the resultant MLS. In this paper, the principle of approximation by skewed arc magnets is proposed and discussed, and the performance of the MLS with skewed arc magnets is evaluated and compared with the ideal MLS in terms of thrust force, torque, and gear ratio. It is highlighted that the gear ratio is the fundamental indicator of the MLS's performance, besides the thrust force and torque. It is shown that the gear ratio of MLS is mainly affected by the reference angle and the arc angle of skewed arc magnets, and optimal values for the two angles are obtained. In addition, the effects of the magnet magnetization on thrust force and torque are analyzed. Finally, dovetail budge and groove are introduced between the adjacent magnet segments for simpler fabrication.