Loss Analysis for Efficiency Improvement of the Integrated Buck–Flyback LED Driver

This paper presents a study of the losses in the integrated buck-flyback converter (IBFC) used as high-power-factor LED driver. The aim of the study is to investigate the possibilities of increasing the efficiency of the IBFC converter. The procedure of the improvement is done by obtaining the equations of the current through each component in terms of converter parameters. The current is found in an average value or rms value, depending on the type of the parasitic component, whether it is modeled by a parasitic forward voltage source or by a parasitic resistance, respectively. Using these equations and the parasitic model, the losses of each element of the converter are estimated. This paper proposes a technique to increase the efficiency of the IBFC by redesigning the converter parameters. Furthermore, this paper presents a case of study with a step-by-step efficiency enhancement process of an existing driver. The driver is operating under universal input conditions, and 38 V output, supplying an LED luminary of 26.5 W. The new design shows an improvement of the efficiency from 82% in the old design to 89% in the proposed one. Moreover, the new design shows an improvement in the power factor and the THD and a 50% reduction in the output current ripple. Furthermore, a reduction in the number of components has been achieved, as it is found by the analysis that by adjusting the converter parameters, one diode can be removed. Finally, the presented methodology is explained in detail so that it can easily be applied to other dc-dc converters.