An Investigation on the AC Dielectric Strength of Paper Sheet Insulation in Liquid Nitrogen

In this paper, seven groups of sheet insulation for use in liquid nitrogen immersed power transformers have been tested under three different standard electrodes from ASTM D149-97a. The seven groups consist of three different types of paper/film, nonadhesive Kapton 100 HN (Kapton), THERNOMID 14.20 paper (NMN), and Nomex 410 paper (Nomex). The porous paper, Nomex 410, is found to have ac dielectric strength of 62-68 kV/mm, which is likely to be independent from its thickness. The nonporous film, Kapton, shows the dielectric strength of 288 kV/mm, whereas NMN paper has a dielectric strength of 74-78 kV/mm, larger than Nomex with similar thickness. Liquid nitrogen gaps near the triple junction of electrodes as well as liquid nitrogen pockets between the fibers are the main sources of partial discharge (PD) for NMN and Nomex. For Kapton, PDs are more likely to occur in the cavities filled with liquid nitrogen, either on the surface of the electrode or around the impurities on the surface of the film. Electrodes with a small stressed volume are more appropriate for dielectric tests of thin paper/film insulation, such as Kapton, due to the lower influence of cavities on the electrode surface. In contrast, electrodes with a large stressed volume and uniform electric field distribution are suitable for the papers such as Nomex and NMN.