New Updates on the ATLAS ROD Board Implementation for Pixel Layers 1 and 2

This paper intends to briefly overview the new technological updates on the large hadron collider (LHC) A Toroidal LHC ApparatuS (ATLAS) acquisition system of the Pixel Detector. The herein presented Read-Out Driver (ROD) is a Versa Module Europa (VME) board devoted to data processing, configuration, and control. It is designed to provide data formatting, front-end specific error handling, and calibration. This board was initially designed to interface the data sensed by the insertable B-layer (IBL) with the ATLAS Trigger and Data AcQuisition system (TDAQ). IBL is the innermost sensing layer of the ATLAS Pixel Detector, added during the 2013/2014 LHC long shutdown, to withstand higher luminosity and feature higher throughput performance. To read out the new layer of pixels with a smaller pixel size with respect to the other outer layers, a front-end ASIC (FE-I4) was designed. Because of its optimal performance, it was decided to adopt the IBL ROD also for pixel Layers 1 and 2. Among the several advantages, one of the most important is the reduction of link occupancy due to the increased bandwidth (80 Mb/s, two times the previous one); 40 ROD boards, fabricated and tested in 2015, were installed in the Layer 2 acquisition system featuring outstanding performance, while 45 RODs for Layer 1 are still under test and will be installed by the end of 2016.