Correlation characteristics between SF6 decomposition process and partial discharge quantity under negative DC condition initiated by free metal particle defect

To study the correlation characteristics between SF6 decomposition components and discharge strength under negative DC partial discharge (PD) initiated by free metal particle defect, SF6 decomposition data were obtained under different voltages on the basis of constructing SF6 decomposition experimental platform. The variation law of SF6 decomposition components and characteristic ratios were systematically analyzed. The study shows that SF6 decomposes into CO2, SO2F2, SOF2, SO2, CF4, and a very small amount of CS2 under PD. The SOF2 concentration and its formation rate have the highest correlation with the PD discharge quantity among all components. The yield relationship of decomposition components is different at different discharge quantities. In addition, the fluctuation of each characteristic ratio is small after 72 h and can achieve a certain degree of steady state. c(CF4+CS2)/c(CO2) and the proposed c(SO2)/c(SO2F2) can be used as the fault severity characteristic ratio in free metal particle defect.