A SiC-based power electronics interface for integrating a battery energy storage into the medium (13.8 kV) distribution system

This paper describes the study of a topology of modular multilevel converters for integrating battery energy storage into a medium (13.8 kV) distribution system. The main benefit of this topology is to remove the need for a bulk 60 Hz transformer that is normally used to step up the output of a voltage source inverter to the medium voltage level. A SiC-based power electronics interface presented in this paper provides an efficient solution without the large and costly transformer. Using medium voltage SiC devices (≥ 10 kV SiC MOSFETs), with their high breakdown voltage, enables the system to meet and withstand medium voltage application, using a minimized number of cascaded modules. This SiC-based power electronics interface significantly reduces the complexity usually faced when Si devices are used directly in medium voltage applications. The voltage and state of charge balancing control for battery modules is also simplified and performs well. The simulation and experimental results, performed on a low-voltage prototype, verify the proposed topology that is presented in this paper.