Two Level Undercut-Profile Substrate-Based Filamentary Coated Conductors Produced Using Metal Organic Chemical Vapor Deposition

The two level undercut-profile substrate (2LUPS) has been introduced as a concept for subdividing rare-earth-Ba 2Cu3O7 coated conductors (CC) into narrow filaments that effectively reduces the ac losses and improves field stability for dc magnets. The 2LUPS consists of two levels of plateaus connected by a wall with an undercut-profile, which enables a physical separation of the superconducting layer between the plateaus without reducing the effective width of the superconducting layer. In this study, we report for the first time the results of fabrication and characterization of a filamentary CC produced in an industrial setup by SuperPower Inc. using ion beam assisted deposition and metal organic chemical vapor deposition (IBAD-MOCVD) on a 2LUPS realized at the Technical University of Denmark, whereas previous studies discussed the fabrication using alternating beam assisted deposition and pulsed laser deposition (ABAD-PLD). We also present Hall probe scanning measurements performed using a standard THEVA TAPESTAR XL machine that is routinely employed for industrial critical current characterization of long length CCs. From these results is it clear that additional analysis of the measured field profiles are required when characterizing filamentary 2LUPS CC using a standard TAPESTAR setting. Using a model representation of the 2LUPS we calculated the expected magnetization response by means of finite element methods simulations and we find a good agreement with the experimentally observed magnetic profiles.