Methods for Extended Tunability in Quadrature Oscillators Based on Enhanced Electronic Control of Time Constants

New methods for extending the tunability range in second-order voltage-controlled oscillators (VCOs) with quadrature outputs are presented and compared in this paper. Linear dependence is the most common type of relation between frequency of oscillations (FO) and control voltage (or current) in communication subsystems (VCOs). However, there are other nonlinear types of dependencies that are advantageous (quadratic and cubic) and should be further studied. Positions of controllable blocks within the structure of the oscillator (providing parameters influencing time constants of integrators) in two scenarios are studied together. The impact of controllable parameters of these additional elements on FO as well as on produced output signal levels is evaluated. The simulation and experimental results are shown to confirm expected behavior of solutions in the case of the quadratic type of control of FO. Nowadays, standard linear control offers a tunability ratio 10:1 (for the same ratio of parameters that control the FO) only. However, in this paper, the experimental tests yield a tunability ratio 80:1 (50 kHz-4 MHz) for dc control voltage within the range 0.175-1.75 V (10:1). The presented approach is very beneficial for low supply voltage systems requiring a wide range of tunability and also for utilizing active devices having limited range of adjustability of their controllable parameters while still requiring wide tunability.