Characteristic Analysis of an HTS Flux-Switching Synchronous Generator With NI-Type HTS Field Coils

This paper presents the characteristics analysis of the flux-switching synchronous generator (FSG) applying no-insulation (NI)-type high-temperature superconducting (HTS) field coils. The HTS FSG can be cost effective, since the field coils and armature windings are both installed in the stator, while the rotor is only made of iron core with tooth. Along with low cost, since HTS field coils in the FSGs are located in the stationary part of the generator, FSG can be a solution for the design complexities of the excitation and cooling systems for HTS field coils. In addition, several studies on HTS coils without turn-to-turn insulation (NI) have been reported for HTS field coils for applying in electrical rotating machines. The NI-type winding technique enhances the stability of the HTS field coil since the overcurrent is automatically bypassed through the contacts between winding turns. Nevertheless, there is still an issue about whether the NI-type HTS field coil can be applied to the electrical rotating machines. In this study, we fabricated and tested an NI-type HTS field coil. In addition, a 600-kW HTS FSG was designed using a fundamental design process and the characteristics analysis of the generator was performed based on the test results of the fabricated NI-type field coil. The results show that the HTS FSG having NI-type HTS field coils is able to operate normally under normal operating conditions. However, the field current charging problem issue has been revealed through this study. Therefore, further research will need to improve the problem.