Paper based pressure sensor for green electronics

This work reports a resistive paper-based disposable pressure sensor based on porous 3D conductive cellulose micro-fiber network. The conductivity in microfibers was achieved by subjecting the network to graphene oxide (GO) — poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT: PSS) solution. The modified cellulose matrix is sandwiched between graphite paper electrodes so that overall structure is flexible. The device tested in 32–386 Pa range detected a minimum of 34 Pa and exhibited fast dynamic response (in tenths of seconds) with excellent repeatability. The proposed approach for disposable sensors is a step towards green electronics and holds promise for wide range of wearable applications.