Comparative study of real time implementation of LabVIEW based MPC controller and PID controller for flow control loop

This paper presents the comparative study of Model Predictive Controller (MPC) with PID Controller implemented for flow control loop in LABVIEW. Classical PID controller is mostly used in process instrumentation yet tuning of PID controller is the crucial part to be dealt with. Moreover, changes in the parameters of the loop components affects the tuning of the controller, hence over a period of time retuning of PID controller is required. On the other hand MPC controller works on the process model which predicts and optimizes the process performance. Here, Flow control loop performance was studied for MPC and PID controller. MPC worked on 1st order state space system model and PID was tuned using Internal Model Control (IMC) method. The result of implementation shows that, MPC controller performs much better than PID controller. Set point of with less settling time and zero peak overshoot was observed in MPC whereas PID has comparatively more settling time and peak overshoot.