A MCM-D-type module for the ATLAS pixel detector

For the ATLAS experiment at the planned Large Hadron Collider (LHC) at CERN hybrid pixel detectors are being built as innermost layers of the inner tracking detector system. Modules are the basic building blocks of the ATLAS pixel detector. A module consists of a sensor tile with an active area of 16.4 mm/spl times/60.4 mm, 16 read out ICs, each serving 24/spl times/160 pixel unit cells, a module controller chip, an optical transceiver and the local signal interconnection and power distribution busses. The dies are attached by flip-chip assembly to the sensor diodes and the local busses. In the following a module based on MCM-D technology will be discussed and prototype results will be presented.