An Empirical Model for Predicting SE Cross Section for Combinational Logic Circuits in Advanced Technologies

At the gigahertz range of frequencies, contribution of combinational logic upsets has increased significantly to the overall single-event (SE) upset rate (SER) of sequential circuits. Most approaches for modeling and/or predicting logic SER are either pure simulation based or pure experiment based. Simulation-based approaches need a lot of computing power. Experiment-based approaches require fabrication of actual circuits. This paper presents an empirical method that uses experimental data from simple test structures for estimating SE vulnerability of any combinational logic circuit. Estimated logic SEU cross section matches well with the measured logic SEU cross section. Estimated logic SEU cross section results obtained with the proposed method are within 2× average error when compared to the experimentally measured logic SEU cross section. This method only needs to be calibrated once for use at a given technology node.