Abstract:
Electromagnetic radiation for a printed circuit board (PCB) midplane connector is studied in this paper. By applying integral-equation (IE) based method and characteristi...Show MoreMetadata
Abstract:
Electromagnetic radiation for a printed circuit board (PCB) midplane connector is studied in this paper. By applying integral-equation (IE) based method and characteristic mode (CM) analysis, the current is split into radiating and non-radiating ones. The radiated power from each part of the structure can be quantified using the radiating current. Therefore, the radiation hot spot can be identified for both edge-side coupled and broad-side coupled connectors. Furthermore, the radiation characteristics for these connectors are compared.
Published in: 2017 IEEE International Symposium on Electromagnetic Compatibility & Signal/Power Integrity (EMCSI)
Date of Conference: 07-11 August 2017
Date Added to IEEE Xplore: 23 October 2017
ISBN Information:
Electronic ISSN: 2158-1118