Source localization using TDOA/FDOA/DFS measurements with erroneous sensor positions

This paper considers the problem of moving source localization by introducing an additional Doppler frequency shift (DFS) measurement into the previous location system using time differences of arrival (TDOAs) and frequency differences of arrival (FDOAs). Because of the separation of associated data channels and the difference in the estimation techniques, the DFS is independent of TDOA and FDOA measurements. The Cramer-Rao lower bound (CRLB) analysis shows that introducing DFS can improve source localization accuracy comparing with that of the TDOA and FDOA localization system, especially for the velocity location accuracy. An improved two-step weighted least-squares (I-TSWLS) source localization method utilizing DFS as well as TDOA and FDOA is developed. The solution is shown analytically to achieve the CRLB over small noise region, and have a better performance than that of the TSWLS method, especially when the sensor station error noises become large. Simulation results demonstrate the good performance of the proposed method.