LTE transmission exploiting pulse width modulation in fibre optic links

Recently it has been demonstrated that pulse width modulation (PWM) can represent a viable solution for the analog optical fronthaul alternative to standard radio over fibre, which still avoids the bandwidth expansion of the digital fronthaul. The PWM encodes the analog samples at the transmitter onto the duration of the on/off keyed optical signal, splitting the sampling and quantization of the radio signal between remote radio units (RRUs) and baseband units (BBUs). In particular in this contribution we demonstrate the capabilities of optical PWM for the transport of LTE signals to support the centralized access network (C-RAN) fronthaul in fibre optic link up to 10-km of standard single mode fibre. The generation and analysis of the radio signals is provided by software modules compliant with the LTE standard which allowed to analyse performance results for the different LTE carriers, channels and services. The PWM optical signal connecting RRUs to BBUs is generated by either directly modulating a DFB laser or an externally seeded reflective semiconductor optical amplifier (RSOA). Both devices could be exploited inside a wavelength division multiplexed passive optical network (WDM PON) architecture where the various RRU-to-BBU links are pooled through virtual point-to-point connections at different wavelengths.