A Z-Source-Derived Coupled-Inductor-Based High Voltage Gain Microinverter

Microinverters require high voltage gain capability for interfacing the low dc voltage output of photovoltaic (PV) module to single-phase ac grid. A two-stage nonisolated inverter is proposed in this paper, with a first boost stage and a second traditional pulse width modulated grid-tied inverter stage. The proposed boost stage consists of a coupled inductor added with a voltage multiplier to achieve the required high voltage gain at high efficiency and to operate over a wide input voltage range. Among the coupled inductor topologies, adding a clamp circuit is a common solution to limit the voltage spike caused by leakage inductance. In the proposed converter, the resonance between the coupled inductor and voltage multiplier is used to address the issue of voltage spike, thereby reducing both component count and device voltage stress. Detailed analysis and design procedure of the proposed converter is presented in this paper. Experimental results of a 250-W microinverter are presented to validate the proposed converter.