Cascaded Dual-Buck Inverter With Reduced Number of Inductors

A dual-buck inverter (DBI) possesses no shoot-through worries and can boost efficiency by using power MOSFETs. The main drawback of a DBI is the use of more inductors than in a traditional full-bridge inverter. This greater number of inductors decreases the power density and increases system cost. In this paper, a modified cascaded full-bridge DBI is proposed. It retains all the advantages of the conventional cascaded full-bridge DBI, possesses no shoot-through issues, and can be operated with no pulse-width-modulation dead-times. It can be implemented with power MOSFET without reverse recovery issues of a body diode to boost efficiency. The cascaded modules in the proposed inverter share current limiting inductors. Therefore, the number of inductors and inductor footprints, the complexity of the circuit layout, required inductance, and magnetic volume can all be decreased. To show the advantages of the proposed inverter, detailed theoretical analysis and experimental results are provided.