Catching falling conductors in midair — detecting and tripping broken distribution circuit conductors at protection speeds

When an overhead electric power distribution circuit conductor breaks-for example, when a car strikes a pole or a splice or clamp fails-the energized conductor falls to ground. The resulting high-impedance ground fault may be difficult or impossible to detect by relays located in the substation. In any case, no ground fault protection relay can operate until well after the time the fault has occurred-after the falling energized conductor has hit the ground and created a hazardous situation. For decades, utilities and equipment manufacturers have worked to develop methods for tripping these hazardous ground faults as quickly as possible. This paper describes a new falling conductor detection scheme that trips the affected circuit section in the narrow time window between the moment of the break and the time the conductor hits the ground. The affected circuit section is de-energized while the conductor is still falling, eliminating the risk of an arcing ground fault or energized circuits on the ground.