Performance Analysis of TanDEM-X Quad-Polarization Products in Pursuit Monostatic Mode

Since 2010, the two twin synthetic aperture radar (SAR) satellites TerraSAR-X and TanDEM-X have been acquiring high-resolution images to generate a global Earth's digital elevation model (DEM). Both satellites have been flying in a controlled close orbit formation, acquiring data in the nominal bistatic stripmap single-polarization mode. Once the acquisition of the dataset for the generation of the DEM has been completed, the flexibility offered by both SAR instruments in terms of interferometric, imaging, and polarization modes has been further exploited to demonstrate the different capabilities of the TanDEM-X experimental modes. By activating the dual-receive antenna mode, full polarimetric data can be acquired. For the first time, it has been possible to systematically command quad-polarization acquisitions in a dedicated TanDEM-X mission science phase, started in October 2014. In this paper, we present a first performance analysis and quality assessment of such quad-polarization products. The SAR image resolution and the noise equivalent sigma zero have been evaluated to show the quality of the focused SAR products. The influence of different instrument parameters on the SAR and interferometric performance, such as chirp bandwidth, pulse repetition frequency, or block adaptive quantization, has been investigated as well. For the evaluation of the interferometric performance, key parameters such as coherence and interferometric phase error have been analyzed. In this paper, the obtained results are presented and recommendations are given for the optimization in the commanding of TanDEM-X quad-polarization acquisitions.