Analytical and Experimental Investigations on Mitigation of Interference in a DBF MIMO Radar

As driver assistance systems and autonomous driving are on the rise, radar sensors become a common device for automobiles. The high sensor density leads to the occurrence of interference, which decreases the detection capabilities. Here, digital beamforming (DBF) is applied to mitigate such interference. A DBF system requires a calibration of the different receiving channels. It is shown how this calibration completely changes the DBF beam pattern required to cancel interferences, if the system has no IQ receiver. Afterward, the application of DBF on a multiple-input multiple-output (MIMO) radar is investigated. It is shown that only the real aperture and not the virtual one can be used for interference suppression, leading to wide notches in the pattern. However, for any target the large virtual aperture can be exploited, even if interferers are blinded out. Moreover, the wide notches for interference suppression of the real aperture appear narrow in the virtual aperture for target localization. The results are verified by measurements with time-multiplexing MIMO radar.