Design and Characterization of a Rotating Brushless Outer Pole PM Exciter for a Synchronous Generator

Generally, PM machines are used as PMG pre-exciters in 3-stage brushless excitations systems. This paper presents the design, characterization, and prototyping of a rotating brushless PM exciter used in a proposed 2-stage excitation system for a synchronous generator. The proposed design reduces the number of components compared with conventional systems. A comparison with the state-of-the-art conventional excitation systems is given. The design of a fast-response, or high initial response, brushless exciter requires active rectification on the rotating frame, replacing the noncontrollable diode bridge. The objective was to construct an exciter with the capability of a 50 A output field current, as well as a high value of the available ceiling voltage and ceiling current. The final exciter was constructed to be fitted into an in-house synchronous generator test setup. A finite element model of the exciter was validated with experimental measurements. The exciter prototype is also compared with an alternative armature design with nonoverlapping single-layer concentrated windings, but with the same main dimensions. The paper includes a general design procedure suitable for optimization of PM brushless exciters that fulfill the requirements of their synchronous generators and the grid.