Smart unit care for pre fall detection and prevention

Generally falls may occur from moving or resting postures. This may include slipping from bed and fall from a sitting, or from running or walking. The pre-fall is a non-equilibrium state of human position that may lead to serious injuries, and may negatively impact the quality life condition, particularly for elders. Physical disabilities resulting from the fall incidences may lead to high costs involved with the healing process. In this work, an embedded sensor system using Arduino micro-controller was utilized to coordinate the data received from accelerometer and gyroscope. For a given threshold voltage and fall pattern, the fall decision is made by the microcontroller, citing an incoming fall. The study addresses the number of sensors to be coordinated for enhancing probability of receiving a real fall. Sensors are suggested to be placed on the human body within a belt, and safety devices at human body as well as incorporated in a smart room will be coordinated with the processor commands. Near 150 ms time frame was detected from the simulation results, suggesting a safety device to be triggered and activated for protection within this time frame. This paper discusses the research parameters such as response time for the device activation and interfacing the microcontroller to airbag switch, and means of activating the safety devices within the sharp edges in the smart unit care to minimize the impact of the fall injuries.