Transverse 2-D Gliding Arc Modeling

This paper was prepared in response to the growing interest in the numerical simulation of the gliding arc (GA) discharge. Our approach is rather simple 2-D modeling of the GA, in the plane that is parallel to the gas flow and perpendicular to the discharge current. We used Fluent software with a subroutine that calculates electric conductivity of argon plasma and local heat release due to the electric current of predetermined value. Electric conductivity of argon was calculated as function of the reduced electric field and gas temperature. Our results show that this approach can give very useful information about the gas-discharge interaction, which is very important to capture the discharge behavior. Presence of discharge inside the gas flow significantly disturbs both of them. Gas-discharge slip velocity exists at least at the beginning of GA development cycle even if there is no mechanism of the discharge deceleration. Just original spark formation associated with the electrode surfaces results in the appearance of this “independent” slip. In the cases of reasonably high gas velocities and discharge currents, this initial slip does not disappear during the discharge lifetime and can result in significant discharge cross-sectional elongation along the gas flow. Electric field fluctuation at any particular part of the discharge channel can be very large, and this can have the major effect on the nonequilibrium ionization and chemical processes.