Incremental Layer Assignment Driven by an External Signoff Timing Engine

Modern technologies provide wide and thick metal layers that must be wisely used to reduce the delay of critical interconnections. After global routing, incremental layer assignment can improve the circuit timing by properly selecting critical interconnect segments to be routed in the faster (but very limited) wires on upper layers. Existing techniques based on net-by-net iterative improvement may get stuck at locally-optimal solutions depending on net ordering. Recent techniques rule out such drawback through the simultaneous iterative improvement of all nets, but they unfortunately rely on objective functions that may guide the optimization off critical paths. As opposed to all reported techniques, which rely on simplified, overly pessimistic timing models, this paper proposes the decoupling of incremental layer assignment from the timing analysis and the exploitation of flow conservation conditions so as to enable the use of an external signoff timing engine. The novel technique was experimentally compared with two state-of-the art works, leading to 50% less timing violations under total negative slack metric and 35% less timing violations under worst negative slack metric with similar overhead in number of vias.