BLCL ultra efficiency dual energy output motor & generator with 12V DC

This paper deals mechanical and electrical output from a single device. From conventional methods these are two devices outputs as motor and generator respectively. Here this paper deals both form of energy from single machine. Compare to conventional methods this machine needs low power input from 12V DC supply. This input connected to distributed coils, permanent magnet rotor cuts flux force developed and at the same time some distributed coils again collects back this energy as a electrical output. Due to permanent magnet rotor mechanical energy output is more than input and electrical output is minimum 50% of input supply. Hardware is tested at no load, electrical load & with mechanical load. The experimental results are in line with the same theoretical concepts. Hence from experimental results, conclusions are high mechanical output and electrical output with low power level at less cost compared to conventional methods.