DLL: A dynamic latency-aware load-balancing strategy in 2.5D NoC architecture

As the 3D stacking technology still faces several challenges, the 2.5D stacking technology gains better application prospects nowadays. With the silicon interposer, the 2.5D stacking can improve the bandwidth and capacity of the memory system. To satisfy the communication requirements of the integrated memory system, the free routing resources in the interposer should be explored to implement an additional network. Yet, the performance is strongly limited by the unbalanced loads between the CPU-layer network and the interposer-layer network. In this paper, to address this issue, we propose a dynamic latency-aware load-balancing (DLL) strategy. Our key innovations are detecting congestion of the network layer via the average latency of recent packets and making the network layer selection at each source node. We leverage the free routing resources in the interposer to implement a latency propagation ring. With the ring, the latency information tracked at destination nodes is propagated back to source nodes. We achieve load-balance by using these information. Experimental results show that compared with the baseline design, a destination-detection strategy and a buffer-aware strategy, our DLL strategy achieves 45%, 14.9% and 6.5% of average throughput improvements with minor overheads.