3D-fractal engineering based on oxide-only corner lithography

This paper reports a new highly simplified machining process for three dimensional (3D)-fractal nanofabrication based on oxide-only corner lithography. It consists of a repeated sequence of wet etching (silicon), thermal oxidation and wet etching (silicon oxide). The previously reported 3D-fractal fabrication process needed additional low pressure chemical vapor deposition (LPCVD) steps of silicon nitride, as well as local oxidation of silicon (LOCOS). Employing this new procedure, a three generation folded silicon oxide fractal sheet with approx. a 10 µm footprint has been fabricated.