Pulse selection control for the IR FEL photocathode drive laser

The method for current control of a photocathode source is described. This system allows for full remote control of a photocathode drive laser for resulting electron beam currents ranging from less than one microamp to a full current of five milliamps. All current modes are obtained by gating the drive laser with a series of electro-optical cells. The system remotely generates this control signal by assuming a mode of operation with the following properties selectable: Current mode as continuous or gated, micropulse density, macropulse gate width from single shot to 1 ms duration, macropulse synchronization to A/C line voltage (60 Hz) or an external trigger, 60 Hz phase and slewing through 60 Hz when applicable. All selections are derived from programmable logic devices operating from a master-oscillator resulting in a discrete, phase stable, pulse control for the drive laser. Complete system documentation is available at http://www.jlab.org/fel.