Design and Demonstration of Interface Circuits Between Rapid Single-Flux-Quantum and Adiabatic Quantum-Flux-Parametron Circuits

We investigated interface circuits between rapid single-flux-quantum (RSFQ) circuits and adiabatic quantum-flux-parametron (AQFP) circuits for a high-speed and low-power hybrid computing system. In addition, the interface circuits allow us to use long-distance interconnections based on single-flux-quantum (SFQ) passive transmission lines between AQFP gates. The target frequency of interface circuits is several gigahertz. There are two types of interface circuits. The RSFQ/AQFP interface circuit, which transmits a signal from RSFQ circuits to AQFP gates, was realized by coupling an RSFQ toggle flip-flop (TFF) to an AQFP buffer gate. The simulated bias margins of the RSFQ TFF and the excitation current margin of the RSFQ/AQFP interface were 2.22 mA ± 24.7% and 1.71 mA ± 25.0%, respectively. The AQFP/RSFQ interface circuit, which transmits a signal from AQFP gates to RSFQ circuits, was designed by using a high-sensitive magnetically coupled dc/SFQ converter (MC-dc/SFQ) to detect an output current of an AQFP buffer gate. The simulated bias margins of the MC-dc/SFQ and the excitation current margin of the AQFP/RSFQ interface were 0.558 mA ± 20.5% and 1.95 mA ± 36.1%, respectively. We also fabricated and measured the interface circuits.