Accurate Analysis of the Mode (de)multiplexer Using Asymmetric Directional Coupler

Design optimizations of asymmetric directional couplers for the fundamental quasi-TE (TM) mode with the higher order quasi-TE (TM) modes (de)multiplexer including the H
_y
²¹
(H
_x
²¹
), Hy
³¹
(H
_x
³¹
), H
_y
⁴¹
(H
_x
⁴¹
), and H
_y
⁵¹
(H
_x
⁵¹
) modes are studied by a full-vectorial H-field finite-element method. Phase matching of nonidentical nanowires (NWs) are more critical and accuracy of the numerical method for the design is tested here. The effect of possible fabrication tolerance is also discussed thoroughly. These results show that a narrow separation of 100 nm or similar value can be employed for the quasi-TE mode splitters, but for the quasiTM modes, a relatively wider separation of ~ 500 nm may be used. The fabrication of the single mode NW should be strictly accurate within ±5 nm of the design values.