OSFA: A New Paradigm of Aging Aware Gate-Sizing for Power/Performance Optimizations Under Multiple Operating Conditions

Modern systems-on-a-chip and microprocessors, e.g., those in smart phones and laptops, typically have multiple operating conditions, such as video streaming, Web browsing, standby, and so on. They will have different performance targets and run under different supply voltages. Gate sizing (with threshold voltage assignment) is a fundamental step for power/performance optimization. However, conventional gate sizing algorithms only consider one scenario, e.g., the performance-critical operating condition, which may be over-design for other operating conditions. In addition, reliability has become a prime concern in nanometer designs, and gate sizing has been employed to mitigate aging. However: 1) previous aging-affected delay models do not take into account more than one operating condition to estimate the aging impact and 2) earlier aging aware gate sizing algorithms only consider one operating condition at a time. In this paper, we present a new paradigm of aging aware gate sizing, one-size-fits-all (OSFA), which performs power/performance optimizations across multiple operating conditions. The existing delay model for negative bias temperature instability (NBTI) is extended to take into account multiple operating conditions, and incorporated into our OSFA framework. Based on OSFA, we also adjust the supply voltage targeting overall power optimization. A speed-up heuristic is proposed to scale our OSFA design space exploration methodology for higher number of operating conditions. Experimental results on industry-strength benchmarks demonstrate that: 1) compared with conventional approach OSFA could provide an average 6.1% reduction in power without performance loss; 2) NBTI-aware OSFA framework can provide significant improvement in comparison with guard-band based traditional NBTI-aware gate sizing approach; and 3) percentage savings compared to conventional methodology increases with the number of operating conditions.