A prototype broadcast-and-select photonic ATM switch with a WDM output buffer

A rack-mounted prototype of a broadcast-and-select (B and S) photonic ATM switch is fabricated. This switch has an optical output buffer utilizing wavelength division multiplexed (WDM) signals. The WDM technology solves. The cell-collision problem in a broadcast-and-select network and leads to a simple network architecture and the broadcast/multicast function. The prototype can handle 10-Gb/s nonreturn-to-zero (NRZ) coded cells and 5-Gb/s Manchester-coded cells and has a switch size of four. In this prototype, the level and timing design are key issues. Cell-by-cell level fluctuation is overcome by minimizing the loss difference between the optical paths and adopting a differential receiver capable of auto-thresholding. The temperature control of delay lines was successful in maintaining the phase synchronization. Using these techniques, we are able to provide a WDM highway with a bit error rate of less than 10/sup -12/. Fundamental photonic ATM switching functions, such as optical buffering and fast wavelength-channel selection, are achieved. We show our experimental results and demonstrate the high performance and stable operation of a photonic ATM switch for use in high-speed optical switching systems as an interconnect switch for a modular ATM switch and an ATM cross-connect switch.