Modeling of impedance collapse in high-voltage diodes

Electron-beam diodes driven by fast-rising, high-voltage pulses often operate with cold cathodes for which the presence of a plasma adjacent to the cathode surface is essential to obtain adequate electron emission. A consequence of such surface plasma, however, is closure of the interelectrode gap by plasma motion. Resistive heating of the plasma competes with work performed in expanding the plasma and heat transfer to the cold-cathode boundary. The resulting closure speed is calculated, using an MHD code, and found to agree well with results of experiments using organic-cloth cathodes at 35 kV. Computed plasma speeds are typically 8-12 km/s, and are relatively insensitive to the applied voltage. Gap closure due to the plasma motion calculated numerically corresponds to estimates based on impedance collapse in the experiments.