A Peak-Capacitor-Current Pulse-Train-Controlled Buck Converter With Fast Transient Response and a Wide Load Range

It is known that the ripple-based control of a switching dc–dc converter benefits from a faster transient response than a conventional pulse width modulation (PWM) control switching dc–dc converter. However, ripple-based control switching dc–dc converters may suffer from fast-scale oscillation. In order to achieve fast transient response and ensure the stable operation of a switching dc–dc converter over a wide load range, based on a conventional pulse train (PT) control technique, a peak capacitor current PT (PCC-PT) control technique is proposed in this paper. With a buck converter as an example, the operating modes, steady-state performance, and transient respond performance of a PCC-PT controlled buck converter are presented and assessed. To eliminate fast-scale oscillation, circuit and control parameter design considerations are given. An accurate discrete iteration model of a PCC-PT controlled buck converter is established, based on which the effects of circuit parameters on the stability of the converter operating in a discontinuous current mode (DCM), mixed DCM-continuous conduction mode (CCM), and CCM are studied. Simulation and experimental results are presented to verify the analysis results.