ST 2081-10:2015 - SMPTE Standard - 2160-Line and 1080-Line Source Image and Ancillary Data Mapping for Single-Link 6G-SDI

This Standard defines the mapping of: • Mode 1: 2160-line Source image formats identified in Table 1 into a Single-link 6 Gb/s [nominal] SDI bit-serial interface • Mode 2: 1080-line Source image formats identified in Table 6 and into a Single-link 6 Gb/s [nominal] SDI bit-serial interface — This Standard also defines the carriage of ancillary data, and the SMPTE ST 352 payload ID's for the Single-link 6 Gb/s SDI interface. — It is not necessary for implementations to include support for all operating modes or image formats that are included in this standard. Implementers should indicate supported operating modes and image formats in commercial publications.