RP 9:1995 - SMPTE Recommended Practice - Dimensions of Double-Frame 35-mm 2×2 Slides for Precise Applications in Television

(1.1) This practce specifies dimensions and tolerances for a double-frame 35-mm film clip and an associated 2×2-in mount which are intended to ensure that picture information is accurately and consistently positioned in a suitable slide projector. (1.2) The slide mount described in clause 4 represents one suitable method for attaining accurate and consistent positioning of picture information in a suitable slide projector. The use of alternate methods of mounting the film clip to within the same accuracy shall be considered as meeting the requirements of this practice. (1.3) This practice is not intended to replace or to void ANSI/SMPTE 96 or ANSI PH3.43.