Load current pulse shaping on a nanosecond PFL-based accelerator using dynamic LCM technique

Summary form only given. Load Current Multiplier (LCM) continues to be successfully applied on Zebra at UNR. Here we consider further, expanded applications of LCM. Time-shaping of magnetic pressures on pulsed facilities is useful for such a number of High Energy Density Physics (HEDP) applications such as dynamic material properties studies
¹
,
²
, high gain ICF research
³
and instability growth studies
⁴
. The Dynamic LCM (DLCM) technique was recently developed for profiling the dynamic pressure ramp with good reproducibility on the microsecond SPHYNX generator (left plot)
²
. The present report analyses applications of this technique on Pulse Forming Line (PFL) nanosecond generators. The right plot presents simulated load currents I
_d
and load liner accelerations ad for a 0.2 Ω PFL with the voltage V
_eq
. without (dashed lines) and with (solid lines) DLCM for the imploding solid-state load of Ref. 2. DLCM here is an additional compact (5×10 cm) hardware installed between the PFL and the load with an imploding annular plasma shell inside. We report circuit analysis and MHD simulations that identify critical DLCM and load configuration parameters allowing to control the load current ramp. We demonstrate that not only the load magnetic pressure time-dependence can be controlled in the HEDP loads above but also the load current amplitude can be increased with respect to the direct PFL-driven case (right plot).