A Performance Analysis of SIMD Algorithms for Monte Carlo Simulations of Nuclear Reactor Cores

A primary characteristic of history-based Monte Carlo neutron transport simulation is the application of MIMD-style parallelism: the path of each neutron particle is largely independent of all other particles, so threads of execution perform independent instructions with respect to other threads. This conflicts with the growing trend of HPC vendors exploiting SIMD hardware, which accomplishes better parallelism and more FLOPS per watt. Event-based neutron transport suits vectorization better than history-based transport, but it is difficult to implement and complicates data management and transfer. However, the Intel Xeon Phi architecture supports the familiar ×86 instruction set and memory model, mitigating difficulties in vector zing neutron transport codes. This paper compares the event-based and history-based approaches for exploiting SIMD in Monte Carlo neutron transport simulations. For both algorithms, we analyze performance using the three different execution models provided by the Xeon Phi (offload, native, and symmetric) within the full-featured OpenVMS framework. A representative micro-benchmark of the performance bottleneck computation shows about 10x performance improvement using the event-based method. In an optimized history-based simulation of a full-physics nuclear reactor core in OpenVMS, the MIC shows a calculation rate 1.6x higher than a modern 16-core CPU, 2.5x higher when balancing load between the CPU and 1 MIC, and 4x higher when balancing load between the CPU and 2 Macs. As far as we are aware, our calculation rate per node on a high fidelity benchmark (17, 098 particles/second) is higher than any other Monte Carlo neutron transport application. Furthermore, we attain 95% distributed efficiency when using MPI and up to 512 concurrent MIC devices.