Notice of Violation of IEEE Publication Principles: Decentralized event-triggering passive control of networked T-S fuzzy systems

Notice of Violation of IEEE Publication Principles

"Decentralized Event-triggering Passive Control of Networked T-S Fuzzy Systems"
by Huijiao Wang, Peng Shi, and Cheng-Chew Lim
Submitted to the IEEE Transactions on Fuzzy Systems--August 2014

After careful and considered review of the content and authorship of this paper by a duly constituted expert committee, this paper has been found to be in violation of IEEE’s Publication Principles.

This paper contains substantial duplication of original text from the paper cited below. The original text was copied without attribution (including appropriate references to the original author(s) and/or paper title) and without permission.

Due to the nature of this violation, reasonable effort should be made to remove all past references to this paper, and future references should be made to the following article:

Decentralized Event-triggered Dissipative Control of Linear Systems via Dynamic Output Feedback"
by Xian-Ming Zhang and Qing-Long Han
Submitted to IEEE Transactions on Automatic Control on 7 August

"Event-triggered Mixed H-infinity and Passive Control of Linear Systems via Dynamic Output Feedback"
by Xian-Ming Zhang and Qing-Long Han
in the Proceedings of the 39th Annual Conference of the IEEE Industrial Electronics Society (IECON), November 2013, pp. 5080-5085.


The problem of decentralized eventtriggering passive control is investigated for networked T-S fuzzy systems based on dynamic output feedback control. A mixed H1 and passivity control criterion for the closed-loop T-S fuzzy system is established. A new co-design method is developed for the decentralized event-triggered scheme and the dynamic output feedback controller. The method ensures that the resulting closedloop T-S fuzzy system is asymptotically stable with a prescribed mixed H1 and passive performance. A mass-spring-damper mechanical system is employed to illustrate the effectiveness of the proposed new design techniques.