Materials Integration for Printed Zinc Oxide Thin-Film Transistors: Engineering of a Fully-Printed Semiconductor/Contact Scheme

We report for the first time on the impact of a printed indium tin oxide (ITO) layer inserted between a printed silver conductor and solution processed zinc oxide (ZnO) leading to an optimized semiconductor/contact scheme for full print integration. Introducing the ITO interlayer, the contact resistance is reduced by two orders of magnitude. Nanoparticle thin-film transistors (TFTs) in this Ag/ITO contact configuration show improved saturation mobility of 0.53 cm
²
·V
^-1
·s
^-1
with respect to 0.08 cm
²
·V
^-1
·s
^-1
without ITO interlayer. The contact improvement can be attributed to either an increased charge carrier concentration or a reduction of band offsets at the ZnO/electrode interface.