IEEE/ANSI Draft Recommended Practice for Electromagnetic Compatibility Limits and Test Levels

This recommended practice presents a rationale and recommendations for developing emission limits and immunity test levels. These limits and levels are representative of current practice and user needs. Emission limits are specified by national and international standards bodies. Emission limits for the most part are regulated and hence controlled, which is the case in the US and Canada. Such regulatory limits take precedence, even if the limits are different from those considered in this document. For product immunity, while in some parts of the world this is regulated, for the US and Canada, it is not regulated except for some types of safety equipment. In this way, adequate immunity is more a quality aspect of the product because it does not operate in its intended RF environment, the user would deem it of poor design and quality. The immunity test levels described in this document are representative of common levels applied internationally. However, severe environments (in which levels of electromagnetic disturbance are high) require the consideration of applying higher test levels. This is described herein. Finally, it should be noted that the entire recommended practice does not contain normative requirements, as such practices remain optional.