Aperture-array directional sensing using 2-D beam digital filters with doppler-radar front-ends

A directional sensing algorithm is proposed employing doppler radar and low-complexity 2-D IIR spatially bandpass filters. The speed of the scatterer is determined by the frequency shift of the received signal following down-conversion. The downconversion is done by mixing it with the instantaneous transmitted signal. The direction of the scatterer is determined by the means of 2-D plane-wave spectral characteristics, using 2-D IIR beam filters. The proposed architecture was simulated for three scatterers at 10,° 30,° 60° from array broadside, traveling at speeds of 31 ms,
^-1
18 ms
^-1
and 27 ms
^-1
, respectively. A doppler radar module was used to transmit and receive reflected signals, that has a carrier frequency of 2.4 GHz. Simulations show both direction and doppler information being enhanced.