A Stacked-FET Linear SOI CMOS Cellular Antenna Switch With an Extremely Low-Power Biasing Strategy

A stacked field-effect transistor (FET) linear cellular antenna switch adopting a transistor layout with odd-symmetrical drain-source metal wiring and an extremely low-power biasing strategy has been implemented in silicon-on-insulator CMOS technology. A multi-fingered switch-FET device with odd-symmetrical drain-source metal wiring is adopted herein to improve the insertion loss (IL) and isolation of the antenna switch by minimizing the product of the on-resistance and off-capacitance. To remove the spurious emission and digital switching noise problems from the antenna switch driver circuits, an extremely low-power biasing scheme driven by only positive bias voltage has been devised. The proposed antenna switch that employs the new biasing scheme shows almost the same power-handling capability and harmonic distortion as a conventional version based on a negative biasing scheme, while greatly reducing long start-up time and wasteful active current consumption in a stand-by mode of the conventional antenna switch driver circuits. The implemented single-pole four-throw antenna switch is perfectly capable of handling a high power signal up to +35 dBm with suitably low IL of less than 1 dB, and shows second- and third-order harmonic distortion of less than -45 dBm when a 1-GHz RF signal with a power of +35 dBm and a 2-GHz RF signal with a power of +33 dBm are applied. The proposed antenna switch consumes almost no static power.