Selection of snubbers and clamps to optimize the design of transistor switching converters

In power transistor switching circuits, shunt snubbers (dv/dt limiting capacitors) are often used to reduce the turn-off switching loss or prevent reverse-biased second breakdown. Similarly, series snubbers (di/dt limiting inductors) are used to reduce the turn-on switching loss or prevent forward- biased second breakdown. In both cases, energy is stored in the reactive element of the snubber and dissipated during its discharge. If the circuit includes a transformer, a voltage clamp across the transistor may be needed to absorb the energy trapped in the leakage inductance. The action of these typical snubber and clamp arrangements is analyzed and applied to optimize the design of a flyback converter used as a battery charger.