High-efficiency converter and battery charger for an RTG power source

Spacecraft power systems utilizing radioisotope thermoelectric generators CRTGs) as primary power sources present an uncommon set of require ments and limitations for interfacing dc-to-dc converters. A converter configuration is presented that complements these RTG characteristics. The circuit is a variation of the basic flyback regulator modified to provide input regulation. The converter has two isolated outputs. One output provides power directly to the spacecraft equipment, while the second is used for battery charging. Design problems addressed are noise generation in long cable lengths between the RTG source and the converter, regulation of the converter input to obtain maximum power transfer from the RTG to the equipment, and provision for two converter outputs while maintaining high efficiency with a simple design implementation. The design of a converter and battery charger used on the Viking Lander Capsule
^*
is presented as an illustration.